io control

ImageFlow supports commercial IO module from National Instruments

All inspection tools are supported by ImageFlow's event management matrix. For example if a defect is detected by any inspection tool it can be set up to generate an application event. This event then can be used on it's own or together with other events to activate an alarm.  The decision tool  is the interface used to define these alarms. 

iodecision.png

Once an alarm has been generated it can activate a physical electrical I/O line based on the system configuration. This is dome through the interface below.

digitalIO.png

ImageFlow supports two I/O controllers from National instruments. The first is USB-6525 and the second is USB-6341. 

  • USB-6525 is a simple low cost relay block to be used for turning on lights and alarms. 
  • USB-6341 is an advanced controller and incorporates and encoder interface. This can be used for real time mapping of defects in a queue to the encoder for point rejection. This interface is also used for the rewind control.

encoder interface.png


Our advantage

ImageFlow is completely configurable. There is no need for coding. ImageFlow is designed to take advantage of commercial multi threaded processors to enhance performance. It is a pipeline image processor so the inspection is optimized to run in real time and process large images. 

To learn more access our white papers or for a free consultation, contact us now. OneBoxVision  operates globally with solution partners in North America, Europe and Asia.

Access Vision Library ›Contact Us ›